EchoSonic® LU23-29 Ultrasonic Liquid Level Sensor Transmitter
The general purpose ultrasonic level transmitter provides continuous level measurement up to 32.8’ (10m) with a 4-20 mA signal output, and is configured via our free WebCal software. This non-contact liquid level sensor is ideally suited for corrosive, sticky or waste liquids, and is selected for bulk storage, tanker truck, day tank, process tank, waste sump, neutralization tank, open channel, chemical feed and clarifier applications.
Model :
LU23-29
The general purpose ultrasonic level transmitter provides continuous level measurement up to 32.8’ (10m) with a 4-20 mA signal output, and is configured via our free WebCal software. This non-contact liquid level sensor is ideally suited for corrosive, sticky or waste liquids, and is selected for bulk storage, tanker truck, day tank, process tank, waste sump, neutralization tank, open channel, chemical feed and clarifier applications.
| Specifications | |
| Range: |
LU27: 4” to 9.8’ (10cm to 3m) LU23: 8” to 18.0’ (20cm to 5.5m) LU28: 8” to 26.2’ (20cm to 8m) LU29: 8” to 32.8’ (20cm to 10m) |
| Accuracy: | ± 0.2% of range |
| Resolution: |
LU27: 0.019” (0.5mm) LU23: 0.039” (1mm) LU28/29: 0.079” (2mm) |
| Dead band: |
LU27: 4” (10cm) LU23/28/29: 8” (20cm) |
| Beam width: |
LU27: 2” (5cm) LU23/28/29: 3” (7.6cm) |
| Configuration: |
WebCal® PC Windows® USB 2.0 |
| Memory: | Non-volatile |
| Supply voltage: | 24 VDC (loop) |
| Consumption: | 0.5W |
| Loop resistance: | 500 ohms @ 24 VDC |
| Signal output: | 4-20 mA, two-wire |
| Signal invert: | 4-20 mA or 20-4 mA |
| Signal fail-safe: | 4 mA, 20 mA, 21 mA, 22 mA or hold last |
| Process temp.: |
F: -4º to 140º C: -20º to 60º |
| Temp. comp.: | Automatic |
| Ambient temp.: |
F: -31º to 140º C: -35º to 60º |
| Pressure: | MWP = 30 PSI (2 bar) |
| Enclosure rating: | Type 6P, encapsulated, corrosion resistant & submersible |
| Encl. material: | Polycarbonate |
| Trans. material: | PVDF |
| Cable jacket mat: | Polyurethane |
| Cable type: | 4-conductor, shielded |
| Cable length: | 10’ (3m) |
| Process mount: |
LU27: 1” NPT (1” G) LU23/28/29: 2” NPT (2” G) |
| Mount gasket: | Viton® |
| Classification: | General purpose |
| Compliance: | CE, RoHS |
| Approvals: | cFMus |
• Offered in 4 measurement ranges from 9.8’ (3m) to 32.8’ (10m)
• Configuration is fast and easy via WebCal software and USB adapter
• Narrow 2” or 3” beam width for applications with limited measurement space
• Short 4” or 8” dead band maximizes the measurable filling capacity of the tank
• PVDF transducer and 6P polycarbonate enclosure for corrosive liquids
• Automatic temperature compensation for accurate measurement
• Configuration is fast and easy via WebCal software and USB adapter
• Narrow 2” or 3” beam width for applications with limited measurement space
• Short 4” or 8” dead band maximizes the measurable filling capacity of the tank
• PVDF transducer and 6P polycarbonate enclosure for corrosive liquids
• Automatic temperature compensation for accurate measurement
• Bulk storage
• Tanker truck
• Day tank
• Process tank
• Waste sump
• Neutralization tank
• Open channel
• Chemical feed
• Clarifier
• Tanker truck
• Day tank
• Process tank
• Waste sump
• Neutralization tank
• Open channel
• Chemical feed
• Clarifier
