EchoPod® DX10 Ultrasonic Liquid Level Sensor Transmitter
The general purpose ultrasonic sensor provides continuous level measurement up to 49.2” (1.25m) with a selectable 0-5 VDC, 0-10 VDC or 976-2000 Hz frequency signal output, and is configured via our free WebCal® software. Select the voltage output for interafce with analog input cards. Select the frequency output for interface with discrete input cards. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for small day tank, skid, IBC, sump and proecess tank level applications.
Model :
DX10
The general purpose ultrasonic level transmitter
provides continuous level measurement up to 49.2”
(1.25m) with a selectable 0-5 VDC, 0-10 VDC or 976-
2000 Hz frequency signal output, and is configured
via our free WebCal software. Select the voltage
output for interface with analog input cards. Select
the frequency output for interface with discrete input
cards. This non-contact liquid level sensor is ideally
suited for corrosive, sticky or dirty liquids, and is
widely selected for small day tank, skid, IBC, sump
and process tank level applications.
| Specifications | |
| Range: | 49.2” (1.25m) |
| Accuracy: | 0.125” (3mm) |
| Resolution: | 0.019” (0.5mm) |
| Dead band: | 2” (5cm) |
| Beam width: | 2” (5cm) |
| Configuration: |
WebCal® PC Windows® USB 2.0 |
| Memory: | Non-volatile |
| Supply voltage: | 12-24 VDC |
| Consumption: | 0.5W |
| Signal output: | 0-5 V, 0-10V, 976-2000Hz. |
| Frequency: | Sink current, 15 mA nominal |
| Signal invert: | 5-0 V, 10-0V or 2000-976 Hz. |
| Signal fail-safe: | Full, empty or hold last |
| Process temp.: |
F: 20° to 140° C: -7° to 60° |
| Temp. comp.: | Automatic |
| Ambient temp.: |
F: -31° to 140° C: -35° to 60° |
| Pressure: | MWP = 30 PSI (2 bar) |
| Enclosure rating: |
Type 6P, encapsulated, corrosion resistant & submersible |
| Encl. material: | Polycarbonate |
| Strain relief mat.: | Santoprene |
| Trans. material: | PVDF |
| Cable jacket mat: | Polyurethane |
| Cable type: | 6-conductor, shielded |
| Cable length: | 48” (1.2m) |
| Process mount: | 1” NPT (1” G) |
| Mount gasket: | Viton® |
| Classification: | General purpose |
| Compliance: | CE, RoHS |
| Approvals: | cFMus |
• Continuous non-contact level measurement up to 49.2” (1.25m)
• Selectable voltage or frequency (discrete) signal outputs
• Configuration is fast and easy via WebCal software and USB adapter
• Narrow 2” beam width and short 2” dead band optimized for small tanks
• PVDF transducer and 6P polycarbonate enclosure for corrosive liquids
• Automatic temperature compensation for accurate measurement
• Selectable voltage or frequency (discrete) signal outputs
• Configuration is fast and easy via WebCal software and USB adapter
• Narrow 2” beam width and short 2” dead band optimized for small tanks
• PVDF transducer and 6P polycarbonate enclosure for corrosive liquids
• Automatic temperature compensation for accurate measurement
• Small day tank
• Skid
• IBC
• Sump
• Process tank
• Skid
• IBC
• Sump
• Process tank
