• Electromagnetic flow meters with F flow tube

Electromagnetic flow meters with F flow tube

Model : FG4000

The F (flanged) flowtube meter is the FG4000 flow meter’s standard design. You can choose a rubber or Teflon liner and from several sensing electrode materials (316L grade stainless steel, Hastelloy C, titanium, tantalum,…) to match your application’s requirements.

Basic rubber liners are suitable for applications to measure flow in common liquids such as waste water or water for firefighting or cooling purposes in various industrial processes, and similar liquids.

Teflon liners provide high chemical and thermal resistance as well as health safety. They are thus suitable for applications in chemical, dairy, food processing and other industries with similar requirements. The are commonly used to measure flow in drinking water, wine and related products, syrup, milk, whey, beer, and other food consumables. Besides other, they resist cleaning lyes or acids that are used in such applications on a daily basis.

The flange basic dimensions and flowtube installation lengths comply with ISO standards (see the chart below). However, custom specified designs with other types of flanges (ANSI, BS, JIS, …) and custom installation lengths may be supplied.

Our flanged flowtubes are provided with an earthing electrode in factory while earthing rings can be included on request. This guarantees flawless flow meter operation at all times even for installations in plastic pipework.

We further provide our flow meters with custom specified installation sets. Custom installation lengths and connectors (DIN 11851 threading for food industry, DIN 32676 clamp, etc.) may be specified.

Transducer: COMFORT ECONOMIC
Display: YES (2x16 chars) NO
Keypad: YES NO
Measuring range: 1 :40 ( ±0,5% for MPE standard); 1:500 (Q0=0,2% Qmax)
Accuracy: ± 0.5 % (± 0.003 m/s) in range from Qmin do Qmax
Minimum liquid conductivity: >5ųS/cm – common liquids; ≥20ųS/cm – demineralized water
Power supply: 230 VAC (+10;−15%) 50–60Hz; optionally 120VAC, 24VAC, 24VDC
Power demand: 10 VA
IEC 536 protection class: I
Ingress protection rating: IP67
Meter finish: powder paint (RAL 8023)
Ambient temperature rangé: 0–70°C; recommended 15–55°C
Pulse output 1: in range 0.0001–1600 p/dm3 (maximum value depends on flowtube inner diameter)
Pulse output 2: state – signalization of the negative flow; pulse – negative volume (bidirectional flow)
Pulse inputs: 2× range (0.0001–1000 p/dm3) to display flow and/or volume measured by external
Empty pipeline indication: yes (optional)
Communication modules: RS485, RS422, RS232, M-Bus, ... (optional)
Communication protocols: SIMPLE, ModBUS, BitBUS, ASCII , MBUS
Analogue outputs: 4-20 mA, 0-10 V (optional)
Archive: hourly, daily, monthly, errors,.. (optional)

Flanged flowtube specification:

Flowtube nominal inner diameter: DN25 – DN600 (rubber); DN10 – DN350 (PTFE - teflon); DN300 - DN600 (E-CTFE)
Flowtube liner: hard or soft rubber / PTFE / E-CTFE
Electrodes: 316L grade (1.4571) stainless steel; Hastelloy C; platinum; tantalum; titanium
Nominal pressure: DIN, EN1092 - PN10, PN16, PN25, PN40; ANSI - 150lb, 300lb
Flowtube design: compact; split – 4m cabling (optionally up to 40m)
Temperature of the measured liquid 0-150°C (PTFE); 0-90°C (rubber)
Flowtube finish: epoxy paint (RAL 7043)
Ingress protection rating: IP67 (IP68 optional)

Related Products

Online Process Turbidimeter

Online Process Turbidimeter

Maximum Pressure Limiter

Maximum Pressure Limiter

Digital Controller

Digital Controller

Acting Brand